elecal-AS
Special heating systems
Introduction
At elecal-AS, we manufacture IBC tank heaters for the prevention of heat loss and heating of IBC tanks 1.000 litre.
Application
The main function of the tank heaters is to prevent and compensate for heat losses undergone by certain fluids during the production process.
It is essential that the fluid or product stored in the tank does not freeze and/or change its viscosity or any of its properties, it also prevents these changes affecting the container.
BFVIBC tank heaters
The BFVIBC heater range consists of ready to install heating systems.
Their careful design, robust and easy to handle construction means they can be easily fitted to the tank.
The BFVIBC tank heaters are especially suitable for surface heating as they provide a uniform temperature and, thanks to our wide range of thermostats and temperature control and regulation panels, they prevent the deterioration of temperature sensitive products due to overheating.
| IBC Tank | 1000 L |
| Reference | BFVIBC440010002800 |
| Length | 4.400 mm |
| Width | 1.000 mm |
| Power (W) | 2.800 w |
| Voltage (V) | 230 v |
| Temperature range | 0 - 90ºC |
1.858,10 €/unit
Suitable for metal, glass fibre, polyester, polythene drums etc.
*Heating blankets and bands can also be made-to-measure. Consult our technical department.
Types of fastener
- Plastic clasp or buckles.
Control and regulation
All our heating blankets have a thermostat of one type or another.
At elecal-AS, we offer different control and regulation solutions:
- Economic analogue thermostat AT056:
- Temperature range: 0-90ºC
- Voltage: 230V
- Maximum load current: 15 A
- On/Off differential: 4ºC
- Sensor: Bulb and capillary sensing - 1 metre.
- Digital programmable thermostat DP25A:
- Control panels prepared to work outdoor, from -20 ºC to +140 ºC.
- Case with transparent window: IP-65
- Connection entrances: PG-9
- Relay output: 25 A
- Allows different types of sensors: PTC, PT100, etc.
- Voltage: 230 V.
More information
Quotation
To be able to offer you the most suitable heater, we must know all the drum specifications, the product that it contains, etc.
You can request a quotation for a drum heater that is suitable for your application, using any of these options:
- Send us by conventional post, fax or email, the drum characteristics, the material of which it is made, type of product stored, temperature you wish to achieve, ambient conditions, etc.
- Fill in the form below with all your details, drum specifications, product, temperature you wish to achieve, ambient conditions, etc.
- Contact our technical department
